Call settings
Send my caller ID
(
)—You can set your phone number
to be displayed to (
Yes
) or hidden from (
No
) the person to
whom you are calling, or the value may be set by your
network operator or service provider when you make a
subscription (
Set by network
).
Call waiting
(
)—If you have activated call waiting, the
network notifies you of a new incoming call while you
have a call in progress. Select
Activate
to request the
network to activate call waiting,
Cancel
to request the
network to deactivate call waiting, or
Check status
to
check if the function is active or not.
Reject call with SMS
—Select
Yes
to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or reject a call’, p. 33.
Message text
—Write a text to be sent in a text message
when you reject a call.
Image in video call
—You can deny video sending when
you receive a video call. Select a still image to be displayed
instead of video.
Automatic redial
—Select
On
, and your phone makes a
maximum of ten attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press .
Tools
107
Copyright © 2005 Nokia. All rights reserved.
Summary after call
—Activate this setting if you want the
phone to briefly display the approximate duration of the
last call.
Speed dialling
—Select
On
, and the numbers assigned to
the speed dialling keys (
-
) can be dialled by
pressing and holding the key. See also ‘Speed dial a phone
number’, p. 28.
Anykey answer
—Select
On
, and you can answer an
incoming call by briefly pressing any keypad key, except
, , ,
and .
Line in use
(
)—This setting is shown only if the SIM
card supports two subscriber numbers, that is, two phone
lines. Select which phone line you want to use for making
calls and sending text messages. Calls on both lines can be
answered irrespective of the selected line. If you select
Line 2
and have not subscribed to this network service, you
will not be able to make calls. When line 2 is selected,
is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
Line change
(
)—To prevent line selection, select
Line
change
>
Disable
if supported by your SIM card. To change
this setting, you need the PIN2 code.